|
How to code the garage door remote control?
|
In our daily life, due to various reasons, many people have lost the garage door remote control, which has caused a series of troubles. Generally, the garage door remote control is rarely broken, and some are just missing codes, some are just out of power, if the remote control drops, there is no way, you can only re-match one. Do you know how to code the garage door remote control? Let us teach you how to do it.
At present, the garage door remote control is mainly connected to the garage door in a wireless way. Generally, a fixed code or a rolling code is used. Since the code of each brand of garage door remote control is different, the easiest way to obtain it is to consult the production manufacturers. However, the frequency of the garage door remote control on the general market is 433.92MHZ or 315MHZ. Normally, the remote control has three buttons, but there are also two-button remotes;
First, prepare the remote control that needs to be coded, press the code key of the door opener, which is usually behind the motor, press and hold for 1-2 seconds, the indicator light keeps on, press the button on the remote control, the red light on the device and the door opener are on at the same time. Press 2-4 times (different door openers have different times). If the two red lights are on at the same time 2-4 times, the code pairing is successful;
When the code matching process is over, the indicator light should be off. If the code matching indicator light is always on at this time, it means that it is still in the code matching state, and it is likely to be equipped with other remote controls, which will cause future use. Automatic door opening and closing in the middle cause unnecessary losses, so after completing the code matching, you must pay attention to pressing the code key to exit.
edited by qinuo on 29.12.2021
|
|
What is a Remote Control Duplicator?
|
Nowadays, remote control duplicator has a large market abroad. Today, the wireless remote control manufacturer will explain to you what it is. Where is it used?
The biggest difference between the remote control duplicator and the machine copy remote control is that it is automatically compatible with all oscillation resistors, and it does not need to use a copy machine to copy and copy directly with the original remote control. It is simple, convenient and fast. Any customer can complete the operation by themselves.
At present, the remote control duplicator on the market can copy learning code remote control, fixed code remote control, and some rolling code remote control (copying the rolling code remote control requires the manufacturer code of the manufacturer to be built in the remote control duplicator program)
Steps:
1: Delete code: Press and hold any two buttons of the remote control duplicator for 10S at the same time. When you see the LED light flashing quickly (about 2S), then slowly (about 1S flashing once), it means that the code has been cleared. The LED light of the clear coded remote control duplicator should not light up while pressing the button. Note: When you press and hold the two buttons of remote control duplicator at the same time, the LED light will not light up.
2: Copy: firstly place the remote control duplicator next to the original remote (preferably next to the remote control duplicator), press any button of the remote control duplicator, the LED light flashes once, and then press the duplicator. If the LED light keeps on, it means that the code has been copied, and then copy other buttons in the same way. Note: If the copy is not completed within 5S, release the keys of the copy type remote control and the remote control duplicator, and then operate again. For remote controls that are difficult to copy, you can slide the remote control duplicator around the original remote to find the best copy opposite. Other buttons copy methods are the same as above.
|