ojelebyxilasoj
Posts 459
|
Product Name:High Alumina Anchor Bricks For Industrial Furnace
Product Description:
According to the material, it is divided into high alumina and clay. It is recommended to use anchor bricks with an aluminum content of about 73-75. Bricks with this content are not easy to break and have a long safe service life. Of course, according to the usage and price, choose the appropriate anchorage brick.
The anchor brick is a new type of brick for industrial furnaces, in particular to an anchor brick for the top of an industrial furnace, including a cylinder composed of a hanging end and an anchor, and spaced recesses on the surface of the anchor. The groove is provided with ribs along the length direction on at least one surface of the anchor. After the ribs are set, the tensile and flexural strength of the anchor is obviously improved due to the reinforcement and pulling of the ribs, and the stress generated at the groove is The rib is blocked and cannot continue to transmit, so the anchor brick of this structure is not easy to break.
Characteristics:
1. High refractoriness.
2. High strength and High dense.
3. The high temperature strength good.
4. Shock resistant stability is good.
5. High-temperature creep rate is low.
6. Good erosion resistance.
7. Good thermal shock resistance .
Physical and chemical index:
Item
Index
HY-48
HY-55
HY-65
HY-75
HY-80
HY-85
AL2O3 % (≥)
48
55
65
75
80
85
Refractoriness °C (≥)
1750
1770
1790
1790
1820
1850
Refractoriness under load, 0.2MPa, °C (≥)
1420
1450
1500
1530
1550
1580
Permanent linear Change %
1500°C,2h
0.1-0.4
1450°C,2h
0.1-0.4
Apparent porosity % (≤)
22
22
23
23
22
23
Cold crushing strength Mpa (≥)
40
45
50
60
65
70
Application: High Alumina Anchor Brick widely used in every part of blast furnace lining with good work ability.
Product Process
1.Production Process
1)Raw material to factory→checkout→burdening→stirring→mixing→taking out the raw material, 2)Crushing→Mixing→Shaping→Drying→Firing→Inspection→Packaging and Shipment.
2.Quality Assurance Process
1)Going out the furnace→checkout→packing→qualified product→putting in storage→sale,
2)The process from raw to product are strictly tested by equipment.
Inspection and Control of incoming raw materials: according to the chemical content,raw materials are classified into different levels to ensure quality of brick first.
Inspection and control of the process: during the production,every brick will be weighed twice strictly to reduce the error of weight .
Quality audit by quality management: inspection of product standardization of quality of each product by process control and experimentation, taking corrective measures timely whenever deviations are noted.
Before delivery, the inspectors will inspect the size,appearance, physical and chemical properties of brick again in factory.
Price:1.00
Product Website:http://www.huanya-refractory.com
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai3A09, 3AFloor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong Province, China
Descption:Huanya New Materials Co., Ltd. is headquartered in Foshan City, Guangdong Province, and has branch factories in Henan Province and Shanxi Province. We have over 20 years professional experience of kiln materials, and R&D capability, production capability, sales capability of refractory materials, specializing in high-end refractory products and raw materials.
Registered Capital:1000000
EmployeeNum:50
Foshan Huanya New Material Co., Ltd.
Contact:Martin Zheng
Telphone:86-0757-85503335-
Fax:86-0757-85503335-
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|