ojelebyxilasoj
Posts 479
|
Product Name:Light Weight High Alumina Poly Ball Brick
Product Description:
Product Description
Light Weight High Alumina Poly Ball Insulation Refractory Brick For Furnace
Light Weight high alumina poly ball insulation refractory bricks usually use high alumina bauxite clinker and a small amount of clay, after being finely ground, they are cast in the form of mud by gas generation method or foam method, and fired at 1300-1500°C. Sometimes industrial alumina can be used to replace part of bauxite clinker.
Using high alumina bauxite powder and refractory clay as the main raw materials, adding combustible additives, ramming, pouring or extrusion molding, drying and high temperature tunnel kiln firing. The product has small bulk density, high compressive strength, and low thermal conductivity.
Light Weight high alumina poly ball insulation refractory brick is used for the lining and heat insulation layer of masonry kilns, as well as the parts that are not corroded and scoured by strong high-temperature molten materials. When in direct contact with the flame, the surface contact temperature shall not be higher than 1350℃.
Specification
Item
HY-0.5
HY-0.6
HY-0.7
HY-0.8
HY-1.0
HY-1.2
HY-1.3
Bulk Density(g/cm3) ≤
0.5
0.6
0.7
0.8
1
1.2
1.3
Compressive strength(Mpa) ≥
1.0
1.5
2.0
3.0
4.0
4.5
5.0
Rebirth line change rate ≤2 %
1260
1260
1260
1300
1300
1300
1300
TRS,Times (1100℃,water )
8
8
8
10
15
15
15
Thermal Conductivity 350±25℃(w/k*m)
0.23
0.26
0.28
0.29
0.3
0.33
0.36
Al2O3(%)≥
45
45
50
50
50
50
50
Fe2O3(%)≤
2.5
2.5
2.5
2.6
2.8
2.8
2.8
Light Weight high alumina poly ball insulation refractory brick for furnace
Light Weight high alumina poly ball insulation refractory bricks Physical and chemical indicators:The AL2O3 content of high-aluminum poly light insulation brick is more than 45%, and it is a light refractory material mainly composed of mullite and glass phase or corundum. The bulk density is 0.4～1.35g/cm3. The porosity is 66%～73%, the compressive strength is 1～8MPa, the fire resistance temperature is 1600 degrees, and the thermal shock resistance is good.
Light Weight high alumina poly ball insulation refractory bricks Features and advantages:
High compressive strength;
Good thermal shock stability;
Resistance to corrosion in various atmospheres;
Excellent thermal shock stability;
Good thermal insulation performance can reduce the heat capacity of the furnace wall;
The energy saving effect is remarkable, and the thermal efficiency of the kiln is high;
It can be processed into various special-shaped products according to customers' design needs.
Light Weight high alumina poly ball insulation refractory brick for furnace
Straight size:230×114×65 230×114×75 230×57×65
Split size: 230×114×32 230×114×40 230×114×25 230×114×50
Arch/Wedge size: 230×114×65/45 230×114×65/55 230×114×75/45 230×114×75/55 230×114×75/65 Tile size: 230×230×38 230×230×50 230×230×65 230×230×75
Other size: Key brick, Skew brick, Soap, Checker, Neck, Taper Also produce bricks according to customers' needs.
Light Weight high alumina poly ball insulation refractory brick for furnace
Light Weight high alumina poly ball insulation refractory bricks Production Process Crushing→Mixing→Shaping→Drying→Firing→Inspection→Packaging and Shipment
Light Weight high alumina poly ball insulation refractory bricks
Quality Assurance
Huan Ya Refractory is committed to high quality standards for all its products and services. With its thirst on State of the art technology at every level and a wide range of products, HongTai Refractory can provide ideal solutions for the stringent requirement of the customer.
Backed by decade of experience in different industries, and close association with customers,HongTai Refractory will always bring new products which will give better life and value to the user.
The Light Weight high alumina poly ball insulation refractory bricks quality assurance system consists of the following steps:
Inspection and Control of incoming raw materials:According to the chemical content,raw materials are classified into different levels to ensure quality of brick first.
Inspection and process control uring the production, each brick weight twice to reduce weight error.
Inspection of product Standardization of quality of each product by process control and experimentation.
Taking corrective measures whenever deviations are noted.
Price:1.00
Product Website:http://www.huanya-refractory.com
Company Description
Foshan Huanya New Material Co., Ltd.
Address:GuangDongGuangDongFoShanNanHai3A09, 3AFloor, Ruiying Commercial Building, Dali Town, Nanhai District, Foshan City, Guangdong Province, China
Descption:Huanya New Materials Co., Ltd. is headquartered in Foshan City, Guangdong Province, and has branch factories in Henan Province and Shanxi Province. We have over 20 years professional experience of kiln materials, and R&D capability, production capability, sales capability of refractory materials, specializing in high-end refractory products and raw materials.
Registered Capital:1000000
EmployeeNum:50
Foshan Huanya New Material Co., Ltd.
Contact:Martin Zheng
Telphone:86-0757-85503335-
Fax:86-0757-85503335-
Email:Martin_wf_cheng@aliyun.com
Company Website:https://www.huanya-refractory.com
|