| |
Stock_Width.cdl
Description:
If there are some of you out there that does progressive form dies and need a easy way to get the stock width for you parts then just try this little CDL. This will Prompt the user to select the material thickness line and then the inside lines and arcs for the left and right sides of the part. When complete it will display the stock width to produce the part.
|
| |
Auto_Tonnage.cdl
Description:
If you liked the Manual Tonnage CDL then you'll want this one to, It prompts the user for the line that is the material thickness and then the holes or profiles that will be "punched". This CDL has the ability to include the shear on the punches as well as punch stagger.
|
| |
Manual_Tonnage.cdl
Description:
If you liked the stripping CDL then you'll want this one, It Calculates the tonnage for a punched hole or Shape. The Round hole is calculated differently then the shaped hole. This is a manual input CDL to find the tonnage.
|
| |
Stripping.cdl
Description:
This little CDL is just simple. The user inputs variables for the tonnage required to punch a hole or shape and then the CDL will do the math for you and give you the required spring pressure for stripping the part.
|
| |